Setting up a Brick Paver Walkway or Blue Bricks

The usage of Bricks or Pavers to create a sidewalk or outdoor patio complements a house in a method that is unequaled. In addition, setting up a Brick or Paver walkway does not always need a pro.

The key to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are to be set up. The area needs to be dug out at least a foot down, removing all topsoil and clay soil. In addition, string lines should be strung on each side of the walkway. The string lines indicate the ended up height of the walkway.
As soon as the location has been dug, 3/4" gravel stone ought to be laid in and tamped down securely. Then 2" of sand, or stone dust must be spread over the gravel. Again the sand/stone dust must be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline ought to equal the density of the brick or paver.

Now that you have a steady base, place a 1" pipe or journal board the length of the sidewalk on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will create a level surface location to lay the bricks/pavers.

Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared location. These strips will act as your walkway border and help to maintain the integrity and shape of the walkway.

You can then begin to lay the bricks/pavers when this is done. There are numerous patterns you can lay. I particularly like the Herring Bone pattern. The key to interlocking brick machine laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will once again help preserve the integrity of the walkway.

When developing the pathway, inevitably bricks/pavers will require to be cut or divided. Unless you desire to buy or rent an expensive wetsaw, I would recommend purchasing a simple brick/paver splitter. It is essentially a chisel with a large end that is the width of the bricks/pavers. To really cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the spot where you wish to break the brick. Utilizing a hammer strike the butt end of the chisel strongly. You may require to do this a couple of times. You might likewise want to turn the brick/paver over and strike the other side of the brick utilizing the hammer and chisle. Within one or 2 strikes the brick/paver need to break cleanly. If your walkway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, develop the outdoors edges with additional sand, and after that shovel in the topsoil and pack down strongly.
Spread stone dust over the new sidewalk and sweep into the fractures. This will complete the interlocking of the bricks and help to eliminate any weed growth.


In addition, installing a Brick or Paver pathway does not always require a pro. The key to installing a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a steady base, position a 1" pipeline or journal board the length of the sidewalk on either side of the sidewalk. These strips will act as your sidewalk border and aid to keep the stability and shape of the walkway. Inevitably bricks/pavers will need to be cut or split more info when building the walkway.

Leave a Reply

Your email address will not be published. Required fields are marked *