The use of Bricks or Pavers to create a pathway or patio matches a house in a method that is unrivaled. In addition, setting up a Brick or Paver pathway does not always require a pro.
The key to installing a Brick or Paver Walkway is to very first appropriately prepare the area where the bricks/pavers are to be set up. In addition, string lines should be strung on each side of the pathway.
As soon as the area has been dug down, 3/4" gravel stone need to be laid in and tamped down securely. The height in between the tamped down sand and the stringline should equate to the thickness of the brick or paver.
Now that you have a stable base, position a 1" pipeline or ledger board the length of the walkway on either side of the walkway. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will create a level surface area to lay the bricks/pavers.
Now location on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the ready location. These strips will act as your sidewalk border and aid to keep the integrity and shape of the walkway.
You can then begin to lay the bricks/pavers when this is done. There are lots of patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to ensure that they interlock with each other. Constantly stagger surrounding rows of bricks by 1/2 of a brick to interlock them. This will again help preserve the stability of the sidewalk.
Inevitably bricks/pavers will need to be cut or divided when developing the walkway. To in fact cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your sidewalk has curves you will need to buy/rent a wetsaw.
After installing the bricks, develop the outdoors edges with additional sand, and after that shovel in the topsoil and pack down firmly.
Spread stone dust over the new walkway and sweep into the fractures. This will finish the interlocking of the bricks and help to remove any weed growth.
In addition, setting up a Brick or Paver walkway does not always need a pro. The key to setting up a Brick or Paver Walkway is to very first properly prepare the location where the bricks/pavers are to be set up. Now that you have a steady base, put a 1" pipeline or ledger board the length of the sidewalk on either side of the get more info walkway. These strips will act as your sidewalk border and assistance to keep the integrity and shape of the pathway. Undoubtedly bricks/pavers will need to be cut or split when building the sidewalk.